High Quality Tungsten High Heavy Alloy ASTM B777-07 rods
Tungsten high heavy alloy
-Tungsten Nickel Iron Alloy
-Tungsten Nickel Copper Alloy
- Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
- Density:16.8-18.8g/cm3
- Rods Size:dia(1.5 -200) x Length<500mm
Plate size: 0.1min Thickness*W*L
Production Method
1), Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving.
2), Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component.
3). Pre-sintering the pressed components to remove the bonding agent.
Final sintering in the hydrogen fed furnace to fuse the powder particles together.
4). Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings.
High density Tungsten based alloy tungsten bearing ball (tungsten supper shot)
-Tungsten Nickel Iron Alloy
-Tungsten Nickel Copper Alloy
Tungsten Alloy Density: (17~18.5)
Tungsten Alloy component: W(88-98)% with the addition of nickel and copper or nickel and iron, etc
Tungsten Alloy applications: For making rotors of aircraft wings, shileding materias for radioactive isotope (Cobalt 60), and formaterials of armor piercing bullets and mould, etc.
1) Density of tungsten shot: 17g-18.5g/cm3
2) Available size: Dia: 2.0mm,dia2.25mm,dia2.5mm,dia3.0mm,dia3.5mm,dia4.0mm,dia4.5mm,
dia5.0mm,dia5.5mm,dia6.0mm,dia6.5mm and so on,the biggest size is dia15mm.
Heavy Tungsten nickel iron/ tungsten nickel copper(WNiFe&WNiCu) alloy
Material: W90NiCu, W90Ni7Fe3, W92NiCu, W92.5NiFe, W95NiFe, W97Ni2Fe1, etc
| Class |
Nominal tungsten (weight percent) |
Density (g/cc) |
Hardness ( HRC )(maximum) |
| 1 |
90 |
16.85 - 17.25 |
32 |
| 2 |
92.5 |
17.15- 17.85 |
33 |
| 3 |
95 |
17.75- 18.35 |
34 |
| 4 |
97 |
18.25- 18.85 |
35 |
Tungsten Copper Tungsten alloy WCu plate/sheet/bar
1. WCu tungsten copper alloy specification:
1) WCu (W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc)
2) Density:16-18.8g/cm3
3) Size:As your need
Plate: (0.04-50)* W X L
rod-Dia.1.5 - 200 X 300mm Long
4) Flatness tolerance:<4um
5) Roughness:Ra1.6-Ra0.8
6) Surface: polished, ground.
WCu tungsten copper alloy Chemical composition
| Material |
WCu%
Tungsten Content |
Hardness
HB |
g/
Density at 20ºC |
W/M.K
Thermal conductivity at 25ºC |
(10-6/k)
Coefficient of thermal expansion at 20ºC |
| W90Cu10 |
90 |
260 |
17.0 |
180-190 |
6.5 |
| W85Cu15 |
85 |
240 |
16.4 |
190-200 |
7.0 |
| W80Cu20 |
80 |
220 |
15.6 |
200-210 |
8.3 |
| W75Cu25 |
75 |
195 |
14.9 |
220-230 |
9.0 |
| W50Cu50 |
50 |
125 |
12.2 |
310-340 |
12.5 |
Tungsten sheet/plate/foil/strip Specification:
1) Tungsten Sheet/Plate Purity: 99.95%
2) Density: >19.1g/cm3
3) Size: according to the needs of users: T(0.03-40)*W(20-600)*L L<2000mm
4) Surface: Black,Alkali Wash and Polished
5) Condition: hot roll
6) Products Application: Tungsten is suitable for light, electric vacuum device, electric semiconductor device, glass fiber kiln heating element, heat shield, boat and finished products etc.
Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)
Density:16.8-18.8g/cm3
Property of tungsten alloy
Tungsten Alloys
|
| EFI Grade |
EF17 |
EF175 |
EF18 |
EF185 |
| ASTM B 777-07 |
1 |
2 |
3 |
4 |
| Weight % Tungsten |
90 |
92.5 |
95 |
97 |
| Nominal Density GM/CC |
17.00 |
17.50 |
18.00 |
18.50 |
| Minimum* Ultimate Tensile Strength UTS (KSI) |
110 |
110 |
105 |
100 |
| Minimum* Elongation % |
5 |
5 |
3 |
2 |
| Modulus of Elasticity (KSI) |
45,000 |
48,000 |
50,000 |
52,000 |
1. Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
2. Pure tungsten/molybdenum rod surface finish:
Black: surface is as swaged or as drawn, retaining a ciating of processing lubricants and oxides.
Cleaned: Surface is chemically cleaned to removed all lubricants and oxides.
Ground: Surface is centerless to ground to remove all coating and to achieve precise diameter control.
3. Tungsten rods available size:
Forged rods size: Diameter(2-100mm)*Length<2500mm
Strainghtened rods after drawn diameter 0.8-3.2mm
4. Application & Features
Used as electrodes in the field of rare earth metal industry;
For producing electric light source parts and electric vacuum components;
Used in electric boosting glass kiln electrode;
Suitable for producing ion implantation parts;
For producing heating elements and refractory parts in high teperature furnaces;
Very good interlaminar strength at strong thermal and mechanical loadings
5. More information about us:
We promise you -- The advantage of us:
1) products quality, with many years of producing experience
2) low price in the market, and factory direct sales.
3) the whole production line from powder to finished products, top and steady quality assured
4) good packing for safe exprot delivery, and fast manufacturing time
5) fast delivery and best after-sale service.
Our main products:
Molybdenum Products
Molybdenum rods/ Molybdenum plate /Molybdenum sheet
Molybdenum wire/ alloy Molybdenum wire/ Moly wire for EDM
Molybdenum electrode/molybdenum disk/Molybdenum boat/ Molybdenum Crucible/Molybdenum tube
Tungsten Products
Tungsten rods/ Tungsten plate/ Tungsten sheet
Tungsten wire/ Tungsten electrode
Tungsten crucible /Tungsten boat/ Tungsten tube
Other specail shape/part
Alloy Products
TZM Products/MoLa products, WC, Ti, Ta, Ni, etc.
WNiFe / WniCu Product/ Alloy ball/WC-Co
Tungsten fishing products
Tungsten bead, tungsten alloy shot for hunting, tungsten metal material
More information about us:
){kind=link}
){kind=link}